Critical-power electrical contractors in Dallas
Providers serving Dallas, United States. An independent listing for packers, growers and traders.
CEC Facilities Group is a specialty electrical, mechanical and technology contractor with its corporate headquarters on Valley View Lane in Irving, inside the Dallas metroplex. Its mission critical page describes data centre scopes covering cable tray and feeders from medium voltage transformers to E-houses, chiller yards and generators, plus medium voltage service distribution and the installation of 2MW generators and 1MW UPS systems. It also runs a modular prefabrication operation in Irving and holds Texas licence TECL 40545.
Clark Electric is a commercial and industrial electrical contractor and engineering firm that has worked in the Dallas-Fort Worth area since 1984. Its critical power work covers uninterruptible power supply and generator installation and maintenance, switchgear installation, transformer installation, low and medium voltage cable and equipment, and ground resistance testing and correction. It is a Texas registered engineering firm, F-15824, and holds electrical licence TECL 18622. The site does not claim data centre projects, so it is recorded here for critical power work only.
Cummings Electrical is a Texas electrical contractor whose DFW headquarters is on Trinity Boulevard in Fort Worth, with further offices in Waxahachie and Arlington. Its mission critical data centre case studies include a financial data centre in Dallas using medium voltage Main-Tie-Main switchgear, ten backup generators and six UPS systems, and a Midlothian data centre with 25kV switchgear lineups feeding 4000A distribution skids and 2750kW generators. The firm also builds e-houses, electrical skids and custom UL panels through its integrated manufacturing division.
Egnite Electric is an electrical contractor based at Briercroft Court in Carrollton, serving North Texas and the Dallas-Fort Worth metroplex. Its stated experience covers commercial fit-outs and tenant improvements, semiconductor facilities, data centres, airports and industrial projects. For mission critical facilities it handles power distribution, critical infrastructure wiring, backup power systems, redundant distribution and preventative maintenance.
Facility Solutions Group runs its Dallas electrical branch at 2525 Walnut Hill Lane in Dallas and covers Dallas, Tarrant, Collin and Denton counties. The Dallas operation states experience in data centre electrical construction and infrastructure, and offers commercial generator installation and emergency power systems for facilities across the metroplex. Work spans shell and core, fit-out and design-build electrical construction.
Walker Engineering is an electrical contracting and technology services firm with its headquarters on West Walnut Hill Lane in Irving, and Dallas/Fort Worth is one of its four Texas markets. Mission critical is listed among its major markets, and its own project pages record data centre work at Garland and Richardson in the Dallas metro. The company holds Texas electrical licence TECL 17307 and operates a prefabrication shop in Irving.
48 Electric LLC is an electrical contractor based in Chandler that services the metro Phoenix area and the rest of Arizona under ROC 330786. Its stated mission critical capabilities cover high, medium and low voltage distribution, switchgear and paralleling switchgear, generators, uninterruptible power supply and battery systems, switchboards, transformers, power distribution units, remote power panels and automatic transfer switches. Its portfolio records a two megawatt build-out, sixteen remote power panel installs and power distribution unit installs in live data centre environments.
Aldridge Electric is an electrical and civil site infrastructure contractor headquartered at 844 East Rockland Road, Libertyville, Illinois. Its mission critical market covers hyperscale data centres, where it self-performs medium voltage systems, substations, duct banks, outside plant fibre and temporary power. It provided the power and communications site package for a data centre in DeKalb, Illinois.
Bergelectric is an electrical contractor with an office at 3255 E. Elwood Street in Phoenix and data centres among its listed markets. Its data centre page names CyrusOne in Phoenix among its selected projects and states more than ten million square feet of data centre construction and 10,000 miles of conduit installed across the country.
Cannon and Wendt Electric Co. is an electrical contractor with its office on North 16th Street in Phoenix and a Tucson operation trading as Gilbert Electric. Its portfolio records continuing work at the Iron Mountain AZP1 data centre in Phoenix, a 588,000 square foot facility, covering customer suite build-outs and critical infrastructure from 2009 to the present.
Specialty contractor trading since 1925 with its office on Northside Parkway in Atlanta. Its electrical construction group procures, installs, tests and maintains electrical systems for commercial, industrial, healthcare, power generation and mission critical clients, and it also runs field service and testing. Its own testimonials page carries references from a data centre operator and from a substation project coordinated with Georgia Power.
Continental Electrical Construction Company, which trades as CECCo, is an electrical contractor with its headquarters in Oak Brook, Illinois, a downtown office on West Van Buren Street in Chicago and a warehouse in Bellwood. It has delivered data centre projects including an adaptive reuse build of more than 85,000 square feet over a 27 month programme. Its electrical scope covers UPS systems and generators, power distribution and branch circuitry, and structured cabling.
Corbins is an industrial electrical contractor founded in 1975 with its Arizona office on South 38th Street in Phoenix and further offices in New Mexico, Texas and Nevada. It states that it specialises in the design, installation and buildout of mission critical facilities including data centres and semiconductor plants, and its own articles describe energisation control, commissioning and medium voltage work on data centre sites.
Dubak Electrical Group is an industrial electrical contractor with its corporate headquarters in LaGrange, Illinois, and a manufacturing and training campus in LaGrange Park. Its mission critical line builds data centre electrical systems covering power distribution, back-up generators and uninterruptible power systems. It runs a modular division that prefabricates electrical equipment centres and modular data centres.
Dynalectric Arizona is the Arizona division of Dynalectric Company, part of EMCOR Group, operating from an office on East Peterson Avenue in Mesa. It states that over two thirds of its work is mission critical and that it has carried out data centre work for large internet, search, software and consumer electronics providers. Listed scopes include electrical distribution systems, backup power generation, battery and flywheel uninterruptible power systems, rack level power distribution and medium voltage cabling, splicing and termination.
Commercial electrical contractor operating in metro Atlanta since 1990, with its office at Lilburn in Gwinnett County. Its data centre scope covers full site electrical installation, overcurrent protection, duct bank installation for power and data cable, and redundant power using UPS units, power distribution units and generators. A 24 hour service department handles maintenance and callouts.
Gibson Electric is an electrical and technology contractor with its office at 3100 Woodcreek Drive, Downers Grove, Illinois, working across the Chicago area. It delivered the electrical construction for the first phase of the T5 Data Centers campus in Elk Grove Village, installing two 2.5 MW generators and four 1 MW uninterruptible power supplies. Its mission critical work covers electrical distribution systems, switchgear and data centre cabling.
Gurtz Electric is an electrical contractor headquartered at 77 West Seegers Road, Arlington Heights, Illinois, with two further offices in Wisconsin. It installs building power and distribution systems including distribution panels, transformers, generators, uninterruptible power supply and switchgear, and names high tech data centres and computer rooms among its service lines. Its published project list includes a hyperscale data centre in Illinois.
Electrical contractor founded in 1954 and based at Mableton in the Atlanta metro area. Its data centre work covers diesel generators and fuel systems, generator switchgear, utility paralleling, medium and low voltage switchgear, UPS systems, PDUs and structured cabling. It also holds facility maintenance contracts for data centres and other sites that run continuously.
Kelso-Burnett is an employee-owned electrical, communications and life safety contractor operating in Illinois since 1908. It runs offices in Rolling Meadows, the Chicago Loop, Gurnee and Rockford, plus one in Wisconsin. Data centres are one of the markets it lists on its own site, alongside commercial, industrial, healthcare and renewable energy work.
Commercial electrical contractor based at DeFoors Ferry Road in Atlanta. It names data centres and critical power as two of the four sectors it works in, alongside corporate interiors and medical, and its critical power page covers critical and standby power systems. Services span construction, design-build, prefabrication and a 24 hour service line.
Electrical contractor whose branch list names an Atlanta office at Riverside Parkway in Austell, Georgia, with its home office in Jacksonville, Florida. Its published account of work for the colocation operator Flexential covers data centre white space fit-outs, raised floors, cabling, renovations and ongoing maintenance at five Atlanta sites. The relationship started with a new data centre built in Atlanta.
New Phase Electrical is a critical power contractor with its address on West Pinnacle Peak Road in Phoenix, licensed under ROC 348619. It works only on critical power systems, covering uninterruptible power supply systems and bypass, generators, DC power plants, stationary battery strings and preventive maintenance, for data centres, hospitals and telecom sites. It states a primary concentration in the Phoenix metro with statewide coverage.
Industrial contractor based at Covington, Georgia, inside the Atlanta metro area, with an electrical and controls division that works on data centre projects. Its stated data centre scope covers temporary and permanent site power and distribution, grounding and infrastructure tie-ins, transformer and equipment coordination, site control panels and fibre installation. Rigging, structural steel and automation sit outside the electrical division.
REX Electric and Technologies is an electrical contractor with its office at 10 South Wacker Drive in Chicago. Its electrical construction services include switchgear installations, riser feeders, power and control wiring, mission critical data centres and UPS systems. It also keeps in-house teams inside large data centre facilities to manage and upgrade electrical and cabling infrastructure.
Rosendin is an employee-owned electrical contractor that runs its Arizona work out of a Tempe office. It is the electrical contractor on the MAZ Mesa data centre in Mesa, a design-build project delivered with general contractor DPR Construction. Data centres are one of the market sectors it lists.
Wilson Electric Services Corp is an electrical contractor with its main office in Tempe and further offices in Tucson, Sierra Vista, Albuquerque, Boise and Salt Lake City. Its data centre page describes Maricopa County projects covering 35kV medium voltage systems, underground duct bank, utility transformers, 2,285kW backup generators and 3000A reserve busway, plus a 12 MW Tier III facility in the Chandler technological corridor. It also lists generator, paralleling switchgear and uninterruptible power supply upgrades at a Phoenix area data centre it maintains.
Tools that can help
Need a provider in Dallas?
Send one request and we will pass it to relevant providers here.
Operate in Dallas?
This is an independent listing compiled from public information. Listings are not endorsements, and Fernable has no commercial affiliation with the companies listed.
Related
Read morePJM's queue stopped rewarding being first: what "first-ready, first-served" actually asks you to prove
PJM replaced its serial first-come queue with a first-ready cycle. Readiness now means a deposit and site control, including easements for half the gen tie at DP1.
NewsUS opens a temporary 300,000 tonne beef quota in three tranches
US Proclamation 11059 expands the in-quota allocation for 300,000 MT of lean beef trimmings in three monthly tranches from 1 September to 30 November 2026.
NewsAmericold closes a $1.3 billion cold-storage joint venture with EQT
Americold closed a $1.3 billion joint venture with EQT covering 12 US cold-storage warehouses, EQT taking 70% while Americold keeps operating the sites.
GuideContainer demurrage and detention: what exporters actually owe and when
How container demurrage and detention charges work, why reefers cost more, and what the US FMC's 46 CFR Part 541 rule means for your invoices.
Common questions
Does the contractor need to be based in Dallas?
No, and most large critical-power packages are delivered partly by travelled labour. What matters is resident site management, a registration valid in the United States, named staff holding switching authorisation, and a commissioning team you can get back quickly. If cover is mobilised from elsewhere, check that travel, accommodation and a second commissioning visit are in the preliminaries rather than waiting as a variation.
How early should the electrical contractor be appointed in Dallas?
Earlier than feels comfortable, because the long-lead equipment decides the completion date. If switchgear, transformers, generators or uninterruptible power supplies are on the critical path, either appoint against an early works order for procurement or buy direct as owner-furnished equipment. Both need the load schedule frozen first, so bring the contractor or the equipment maker into the design conversation before the drawings are issued for tender.
What local approvals hold up energisation?
Typically three in sequence: the statutory inspection or certification regime that applies in the United States, the network operator's own staged approvals and metering before it will connect, and the facility operator's acceptance and witnessing process. Each has a notice period and each can be refused. Put them on the programme as named hold points with owners and lead times, and check the notice periods with the bodies themselves rather than assuming last year's still apply.
Why does a provider without a badge marking it as based in Dallas still appear on this list?
Listings on this page are matched by where a provider actually operates, not only by registered address. Some providers cover Dallas from a nearby base, run scheduled routes through it, or serve it as part of a wider territory in the United States. The absence of a city badge simply means their presence there is regional rather than a dedicated local office, so they remain a genuine option worth contacting for work in Dallas.
How does this Dallas page relate to the country page for the United States above it?
The country page for the United States gathers every provider working anywhere within it, across every category, while this page narrows that same pool down to Dallas specifically. Think of it as a filtered view rather than a separate dataset. If a search here comes up thin, the country page is the right next stop, since it will surface providers whose coverage reaches Dallas without being centred on it.
What should I do if the provider I need is not listed in Dallas yet?
Start with the country page for the United States, since a provider covering Dallas without a dedicated local presence may be listed there rather than here. If nothing suitable turns up, check neighbouring city pages, as providers often serve overlapping areas. You are also welcome to point us to a provider you know operates in Dallas so it can be reviewed and added for others searching the same route.
How does a provider get listed for Dallas?
Providers are added after their operations in or around Dallas are checked against publicly available information, such as their own website, registration details, or other verifiable records confirming the work they do in the United States. This keeps the list something buyers can rely on rather than a self-reported directory. A provider already known to serve Dallas that is missing here can be flagged for review and added once that basis is confirmed.
Why this work concentrates in Dallas
Critical-power electrical work follows load, and load follows available power, land and fibre. Where Dallas carries an established cluster of facilities, the electrical scope on offer is a mix of new halls on campuses already under construction and repeated fit-out phases inside buildings that are running. That mix rewards contractors with a standing presence: they know the operator's permit regime, the local inspector, the network operator's process, and which substations still have headroom. It also means demand is lumpy, because a single campus decision can absorb most of the skilled labour available in the United States for a season.
A useful check before tendering is to ask how many comparable campuses are bidding in Dallas at the same time, because concurrent demand for the same specialist trades compresses the pool of contractors willing to price competitively and can push both programme and cost. Ask each bidder what proportion of their current workload sits with other clients in Dallas and whether a second award would force them to split supervision across sites. A firm that is candid about capacity constraints is usually a safer choice than one that promises full attention it cannot deliver.
Everything comes overland
For an inland site, all major plant reaches Dallas by road or rail from a port or works elsewhere, so lead time includes the haul and the permits, and a damaged item means starting that whole leg again. Build the consequence into the design: favour equipment split into sections the route can take, keep critical spares on site rather than trusting an overnight delivery, and confirm that the maker's service engineers can reach the site inside the response time your maintenance contract promises. Air freight exists for a failed component, but not for a transformer.
For an inland site with everything arriving overland, the ordering clock starts earlier than most programmes assume, because the biggest items can carry lead times measured in months before they even leave the factory gate. Bringing the contractor or the equipment manufacturer into the design conversation early enough to place that order against a frozen load schedule is usually what decides whether Dallas sees a normal programme or a stalled one. Keeping a critical spare, such as a spare protection relay or a set of fuses for the largest breaker, on site rather than trusting a supplier's stated response time is a small cost against a long and unplanned outage.
Contractors based in Dallas
Where contractors listed for Dallas run a permanent base there, you get the things that are hard to mobilise: crews who already hold the operator's site inductions, supervisors who know the local inspector and the network operator's process, a stores and a small works capability for the remedial jobs, and a response time for a fault that does not depend on a flight. It also means the firm's reputation is local and checkable. Ask for operators in Dallas you can speak to, and ask about work that went badly as well as work that went well.
A market with several contractors based in Dallas usually prices more competitively, but it also means the strongest supervisors and commissioning engineers get spread across more than one job in the same season, so ask a bidder not just whether they have a local office but which named team would actually staff this project and what else that team is committed to. Checking subcontractor tiers matters too: a prime contractor with a local base can still lean on travelled labour for specialist work such as high-voltage jointing, so ask which parts of the scope stay in-house and which are passed down.
Working nights beside a live load
On a running facility the work happens in permitted windows, usually at night, which changes productivity and supervision. Expect fewer productive hours per shift, a permit and isolation procedure at each end, and a rule that the shift stops in a safe state whether or not the task is finished. Local noise and working-hours restrictions in Dallas can cut the window further, and residential neighbours near a city-centre site can close it altogether. Price the window you will actually get, not the one on the method statement.
Isolations on a live facility usually run through a formal permit-to-work hierarchy with a single authorising engineer, and only one dual-path leg can typically be taken out at a time, which means tasks that look independent on a drawing end up queued behind each other on site. Night and out-of-hours labour also carries a premium that a lump-sum tender should show as a separate line, not bury in the base rate, so a buyer can see how much of the price is driven by the access pattern rather than the work itself.
How service providers are distributed across the United States
Scale is the defining fact of trade-services geography in the United States, and it means comparisons between cities have to account for genuinely different regional systems rather than one national pattern. Coastal gateway cities on the east, west, and Gulf coasts each anchor their own cluster of forwarders, warehousing, and customs expertise oriented toward the ocean and air trade passing through them, while a separate set of inland hubs has grown up around rail and trucking networks that move goods across the interior. A provider in Dallas is typically embedded in one of these regional systems, and that system, more than the city itself, shapes what kind of work it is set up to do well.
Because the country is so large, reach is inherently more limited relative to overall distance than in a smaller market: a provider serving a metropolitan area efficiently may still be several days' transit from a coast on the other side of the country. This makes the choice of gateway, and the corridor connecting a given city to it, a bigger factor in comparing locations than it would be elsewhere. Two cities of similar size can differ substantially depending on which coast, border, or rail corridor they are oriented toward.
For someone comparing two American cities, it is worth asking which gateway a provider's business is actually built around, since a location's position on a map understates how specialised its trade infrastructure can be. A city with strong rail and trucking links inland may be extremely well served for domestic distribution while having comparatively thinner direct expertise in ocean freight, and the reverse holds for many port cities. Matching the corridor to the trade lane matters more than matching the city to a rough sense of the country's size.